1

Containers material

Non-metallic containers: plastic / glass / ceramic, metal containers: aluminum, iron

2

Size of the containers

1. Plastic / glass / ceramic:

Volume: not less than 100ml, height not less than 3cm

Diameter: more than 30mm less than 200mm

Maximum height: no limit

Wall thickness: no more than 8mm

2. Metal container:

Volume: not less than 100ml, height not less than 3cm

Diameter: more than 30mm less than 150mm

Maximum height: no limit

Wall thickness: no more than 0.5mm

3

Dangerous Liquid Detectable

The instrument is capable of alarming the following flammable or hazardous liquids in sealed containers:

93# gasoline, kerosene, diesel, ether, diisopropyl ether, petroleum ether, acetaldehyde, ethylene glycol, nitrobenzene, propylene oxide, n-heptane, pine perfume, acetone, benzene, toluene, xylene, dichloro Ethane, ethanol, isopropanol, 70% ethanol, carbon disulfide, methanol, nitromethane, 70% isopropanol, Paint thinner (nitro thin solvent), trichloromethane, tetrahydrofuran, paint,Hexane, hydrochloric acid, sulfuric acid, nitric acid

4

Volume requested

Not less than 100ml, height not less than 3cm

5

Time of testing

Single piece of liquid item detection time is less than 8 seconds

Insulated container (plastic, glass, ceramic container): less than 1 second

Metal container (aluminum can, iron can): less than 4 seconds

6

Max. Power consumption

Less than 20W

7

Data Storage

Stores no less than 10,000 tests results, and can export data through standard USB interface, read and analyze through PC software

8

Insulation resistance

Between the source plug or the power inlet and the bare metal part of the housing Insulation resistance, not less than 100 MΩ at normal temperature; after damp pretreatment with relative damp heat of 91% to 95%, temperature of 40 ° C, 48 hours, equipment

The insulation resistance is not less than 2MΩ.

9

Leakage current

The leakage current of the equipment during working in accordance with the safety requirements of electronic equipment, less than 5mA

10

Weight

Around 8.3Kg

11

Working Temperature

-10℃～55℃； 0%～90%

12

Pressure

86kPa～106kPa

13

Power supply

AC 180V-240V (50/60Hz)

1

Time Setting

Set the time for the equipment

2

Password settings

Modify the initial password

3

Adjust contrast value

Set the brightness of the LCD screen. The higher the value, the brighter the screen.

4

Device ID

Display device ID, find settings information

5

Restore settings

Enter password to restore factory settings

6

IP setting

Communication with the host computer through the network interface and USB interface

7

Switch account

Identify the user who is currently operating the system, and then save the detection result combined with the user name.

8

Language selection

Switching between English and Chinese

9

Equipment parameters

for after-sales engineers to set the parameters according to the specific environment

10

Firmware version

Indicates the current version and for further upgrading

11

Accuracy adjustment

Adjust the recognition accuracy of the software by setting the value

12

Self-checking

When there are a lot of false alarms, use this function to

improve the inspection accuracy of the machine

13

Alarm sound

switch on/off sound alarm

14

Alarm reset mode

Select alarm rest whether when the object to be removed not when not removed

15

Alarm Indication

sound, light, LCD display alarm

1

Screen

Top Micro, LM240160CCW, 240x160 black and white LCD

2

Main board

Control-E

AT

3

RF power amplifier board

AT1000-PA-D

AT

4

RF receiver board

RX-C

AT

5

RF transmitter board

TRA-E（printed as TAR-E）

AT

6

Antenna board

Tianhe-antenna

AT

7

Heating film

AT1000II， JIAREMO，Version: G

8

Thermocouple

Taiwan Taishi, NR81531B

9

Keyboard

DeZhongHeng, K38-1, 78x98mm, English

1

AT1000II-2 Detector

1

2

1.5m USB cable

1

3

2m power cable

1

4

2m Crossover internet cable

1

5

Accessories box

1

6

Manual, certificate / warranty card

1

7

250MLPlastic sampling cup

1