The x-ray baggage scanner is a new type of security screening equipment that uses X-rays to penetrate and inspect baggage and goods without opening the box. It is suitable for use in government agencies, transport, logistics, courts, procuratorates, prisons, embassies, factories, schools, hospitals, gymnasiums, exhibition halls, and entertainment venues for security checks of briefcases, parcels, express mail, hand luggage, small parcels and much more. Next, let's take a look at the supervision and operational safety precautions of the x-ray baggage scanner. Here are some answers.

Here is the content list:

l What is the regulation of the x-ray baggage scanner?

l What are the operational safety precautions for the x-ray baggage scanner?

What is the regulation of the x-ray baggage scanner?

The State implements a licensing system for the use of nuclear technology and implements a hierarchy of management for radioactive sources and radiation devices. The potential hazards to human health and the environment are classified from high to low as Class I, Class II, and Class III. X-ray baggage scanner is a Class III radiation device, which is a low-risk radiation device. According to national regulations, the x-ray baggage scanner has to apply for a Radiation Safety Permit and the environmental protection department will assess the environmental impact of the x-ray machine and form a written document.

What are the operational safety precautions for the x-ray baggage scanner?

1. Before operating the x-ray baggage scanner, you need to receive relevant training in radiation protection by local laws and regulations.

2. The food x-ray inspection machine should be operated and stored in an environment that is free from dust, chemical corrosion, and static electricity.

3. If necessary, inform the local authorities of the installation and operation of the x-ray baggage scanner and carry out a radiation safety inspection. Please check the radiation protection of the x-ray baggage scanner regularly.

4. Before supplying power to the equipment, make sure that the power supply voltage provided on site is the same as the required power supply voltage and that the power supply capacity is not lower than the power used by the equipment, please refer to the power supply parameters of the x-ray baggage scanner product used.

5. After the X-ray generator has been out of service for a long time, it is necessary to warm up the generator before using it again to prolong the working life of the X-ray generator.

6. The power supply of the equipment should be well grounded, please do not use the equipment in an environment with poor grounding conditions.

7. When installing or replacing parts of the equipment, please contact our after-sales service or local authorized unit.

8. When you find that the external cables, conveyor belts, lead curtains, or indicators are damaged, stop using the equipment and contact our after-sales service or local authorized unit.

9. Only professionals authorized by the x-ray baggage scanner manufacturer are allowed to open the hood housing of the device and operate the internal components.

10. When the device is in operation, ensure that it is manned.

11. When the equipment is in operation, it is forbidden for human beings or other living objects to enter the channel.

12. Items to be inspected should be placed on the conveyor belt as indicated by the sign at the inlet of the equipment channel.

13. When the conveyor is open, the operator should pay attention to the position of the inspected articles on the conveyor to avoid blocking the aisle or dropping the articles to be inspected. Do not stand or sit on the conveyor belt. Please keep the conveyor belt clear during use. If there is a build-up of goods, please clean it up after switching off the unit.

14. During use, please do not cover the heat sink of the equipment, as this may lead to overheating and damage to the equipment.

15. During use, prevent liquids from flowing into the interior of the appliance. If a similar situation occurs, the appliance must be stopped immediately for cleaning. If the equipment is to be stored for a long period without use, it is important to disconnect all power sources to prevent excessive dust from overheating in critical areas and causing a fire. Although the dose of X-rays is very low, the equipment should be kept as far away from the equipment as possible during operation and avoid staying near access points and entrances. Please disconnect the power supply for safety during routine cleaning and maintenance of the equipment.

If you are interested in our x-ray baggage scanner products or have other requirements, please feel free to contact us. Our official website is http://www.safeway-system.com/. Our cost-effective products will bring you a better experience.