How do I operate and use the x-ray baggage scanner?

The x-ray baggage scanner is an important piece of security equipment and is used in a wide range of security checkpoints. However, x-ray radiation is involved, so the x-ray baggage scanner needs to be operated and used correctly. Here are some answers.

Here is the content list:

How do I operate the x-ray baggage scanner?

How do I use the x-ray baggage scanner?

How do I operate the x-ray baggage scanner?

The x-ray baggage scanner must be checked before it can be put into operation. The main items to be checked are whether the display, keyboard, and cables are in good condition and whether the connection cables are plugged in. Check that the lead curtains at the entrance and exit of the x-ray baggage scanner are in good condition, if they are damaged, they must be repaired or replaced before the machine can be used. The surface of the conveyor belt must be clean and tidy and must not be stained or damaged, otherwise contact the after-sales service for cleaning and repair. Check whether there are any stagnant objects in the channel, otherwise, the operation process may cause a jam and damage the equipment. Once the inspection is complete, the machine can be switched on normally. The following steps can be followed to turn on the machine: After powering on the machine, insert the key into the key switch on the machine and turn it 90° clockwise to press the power on button. Press the "Host Power" button, the console power indicator will light up and the unit will start. Wait for the self-test to be completed and the unit will be ready for normal use.

How do I use the x-ray baggage scanner?

Once the x-ray baggage scanner has been activated, you need to guide the person to put down the item correctly for the security check. Once the item has been placed flat on the conveyor belt, the belt is activated by pressing the "belt forward" button. The item then enters the inspection lane, which blocks the light barrier signal. The inspection signal is sent to the control unit, which activates the X-ray generator, which scans it line by line and then creates an X-ray image. The image of the current item will remain on the monitor screen until the next item enters the inspection lane. If it is a high-traffic security site, the actual time we have to observe an inspection image is relatively short, so when it takes longer to judge the current image, you can press the "pause" button to pause the conveyor belt. When the inspection is complete, the conveyor belt will send the item out of the inspection lane and the person being inspected will need to be guided to retrieve the item after it has slid out of the lane.

The above is the introduction of how to operate and use the food x-ray inspection machine, which is quite simple, as long as we follow the steps correctly to use it, we can ensure the steady progress of the security work. We are committed to bringing more and better products to our customers, and this is what we have been doing. If you are interested in our products or have other needs, you can contact us at http://www.safeway-system.com/. We welcome you and look forward to cooperating with you. Our company adheres to the enterprise culture of "quality-oriented, customer first", and always strives to become a professional x-ray baggage scanner supplier in the industry.